Watt
Telescoping
Valves
Rack & Pinion
The telescoping valve assembly/assemblies shall
be manufactured by Latanick Equipment, Inc. Huron,
Ohio. The valve shall be sized to fit the riser pipe and penetrate a minimum of 4”. The floor stand shall be 3” sch10 stainless steel pipe. The handwheel shall be 14” diameter anodized aluminum and work in conjunction with a stainless steel shaft, 1” square steel rack, 2” steel pinion gear and (2) sealed anti-friction bearings. The rack and pinion gear shall allow for 5” of travel per revolution of the handwheel. The slip tube shall be stainless steel and have a minimum of 1/8” wall thickness. The companion flange shall be a cast iron with a neoprene gasket. The
telescoping valve shall be guaranteed against defects
in material and/or workmanship for a period of (1)
year.
|
|
Click
Here to Download specification
Click
Here to Download submittal form
Click
Here to Download Drawing
Click Here to Download Specifications
Click Here to Download Submittal Form
Click Here to Download Drawing |
Rising Stem Screw
The telescoping valve assembly/assemblies shall be manufactured by Latanick Equipment, Inc. Huron, Ohio. The valve shall be sized to fit the riser pipe and penetrate a minimum of 4”. The floor stand shall be 3” sch10 stainless steel pipe. The handwheel shall be 14” diameter
anodized aluminum and work in conjunction with a
stainless steel 1 ¼”-4 double start acme screw, bronze nut and stainless steel ball thrust bearing. The screw and nut shall allow for ½” of travel per revolution of the handwheel. The slip pipe shall be stainless steel and have a minimum of 1/8” wall thickness. The companion flange shall be cast iron with a neoprene gasket. The telescoping valve shall be guaranteed against defects in material and/or workmanship for a period of (1) year. |
|
Non-rising Stem Screw
The telescoping valve assembly/assemblies shall be manufactured by Latanick Equipment, Inc. Huron, Ohio. The valve shall be sized to fit the riser pipe and penetrate a minimum of 4”. The floor stand shall be 3”sch10 stainless steel pipe. The handwheel shall be 14” diameter
anodized aluminum and work in conjunction with a
stainless steel 1 ¼”-4 double start acme lifting screw, stainless steel ball thrust bearing, delrin gears and delrin nut. The screw and nut shall allow for ½” of travel per revolution of the handwheel. The slip pipe shall be stainless steel and have a minimum of 1/8”wall thickness. The companion flange shall be cast iron with a neoprene gasket. The telescoping valve shall be guaranteed against defects in material and/or workmanship for a period of (1) year.
Click Here to Download Specifications
Click Here to Download Submittal Form
Click Here to Download Drawing |